화학공학소재연구정보센터
Journal of Hazardous Materials, Vol.161, No.1, 351-359, 2009
Experimental investigation on the effect of liquid injection by multiple orifices in the formation of droplets in a Venturi scrubber
Venturi scrubbers are widely utilized in gas cleaning. The cleansing elements in these scrubbers are droplets formed from the atomization of a liquid into a dust-laden gas. In industrial scrubbers, this liquid is injected through several orifices so that the cloud of droplets can be evenly distributed throughout the duct. The interaction between droplets when injected through many orifices, where opposite clouds of atomized liquid can reach each other, is to be expected. This work presents experimental measurements of droplet size measured in situ and the evidence of cloud interaction within a Venturi scrubber operating with multi-orifice jet injection. The influence of gas velocity, liquid flow rate and droplet size variation in the axial position after the point of the injection of the liquid were also evaluated for the different injection configurations. The experimental results showed that ail increase in the liquid flow rate generated greater interaction between jets. The number of orifices had a significant influence oil droplet size. In general, the increase in the velocity of the liquid jet and in the gas velocity favored the atomization process by reducing the size of the droplets. (C) 2008 Elsevier B.V. All rights reserved.