BACKGROUND: Various methods, such as glycolysis, methanolysis, and hydrolysis with supercritical water, have been investigated for chemical recycling of poly(ethylene terephthalate) (PET), which is used in large quantities for beverage containers. However, a more effective process is needed. RESULTS: PET was depolymerized in aqueous ammonia in a batch reactor and a semi-batch reactor over a temperature range 463 to 5 73 K, at a pressure 10 MPa, and with up to 3 mol L-1 ammonia. Total organic carbon in the product solution and yields of the major products such as terephthalic acid (TPA) and ethylene glycol (EG) were measured. The PET pellet sample was thoroughly solubilized in aqueous ammonia under hydrothermal conditions, and more than 90% of the initial PET samples were recovered as TPA+EG on a carbon weight basis. Depolymerization rates were represented by 2/3-order reaction kinetics with respect to unreacted PET, where the reaction took place on the PET pellet surface. The rate increased slightly with increasing ammonia concentration. CONCLUSION: Ammonia was effective for depolymerization of PET, allowing the recovery of TPA and EG under hydrothermal conditions. (c) 2008 Society of Chemical Industry.