A commercially available lower critical solution temperature (LCST) polymer was demonstrated to preferentially adsorb water containing a reduced ion concentration, from CrCl3 salt solutions and release some of this scavenged water at higher temperatures. The scavenging ability of the polymer was demonstrated to be dependent on the bulk salt concentration. The volume of water scavenged and the concentration of the remaining CrCl3 solution increased linearly with the amount of LCST polymer (Pluronic PE 6200) used. Both the volume of water removed and the amount by which the remaining CrCl3 solution was concentrated decreased with increasing CrCl3 concentration. Implications for research into a novel method for sea water desalination are addressed. We also show water extraction from dilute sodium chloride and sea water, and that these results are consistent with the CrCl3 model system. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 113: 2346-2352, 2009