Adsorption behavior was quantified with pure ethoxylated nonionic surfactants onto different polymeric surfaces (hydrophilic cotton and hydrophobic polyester) and model hydrophilic gold surface. The polymer materials used for the study were characterized using SEM. The role of ethylene oxide group variation in surfactant-polymer interaction was established using pure surfactant with the same alkyl chain length but varying ethoxylate chain lengths. It was observed that surfactant with more ethylene oxide groups per molecule, being more hydrophilic, interacts favorably with cotton in the hydrophobic siloxane solvent environment. The adsorption of the pure surfactants on model gold surface from hydrophobic solvent and water was also established using the quartz crystal microbalance with dissipation monitoring (QCM-D) system. Effect of ethylene oxide chain length and surfactant concentration on the extent of adsorption was quantified. At the gold-water interface, the plateau adsorption for C12 E3 (15.910-6mole/m2) is about four times higher than for C12E8. An opposite trend was observed for adsorption of the surfactants on gold in the hydrophobic D5 environment. Information about thickness, adsorption and desorption kinetics, and structure of adsorbed layer was obtained from the QCM-D frequency-dissipation data. The study is an important contribution towards fundamental understanding of applications involving the use of ethoxylated nonionic surfactants.