Chinese Journal of Chemical Engineering, Vol.16, No.2, 263-269, 2008
Evaluation of catalysts and optimization of reaction conditions for the dehydration of methyl lactate to acrylates
The production of acrylates from biomass-originated lactic acid is of extraordinary importance, to overcome the increasing worldwide shortage of petroleum. In this study, the catalytic dehydration of methyl lactate over a calcium sulfate catalyst, with various promoters, has been carried out to identify potential catalyst/promoter combinations for acrylate production. The best catalyst for methyl acrylate formation in this study has been calcium sulfate, with cupric sulfate and phosphates as promoters. The optimal mass ratio of m(CaSO4) : m(CuSO4) : m(Na2HPO4) : m(KH2PO4) is 150.0 : 13.8 : 2.5 : 1.2. Effects of carrier gas, reaction temperature, feed concentration as well as contact time on the dehydration of methyl lactate have been investigated. With nitrogen as a carrier gas, a combined yield of acrylic acid and methyl acrylate is 63.9% from 60% (by mass) methyl lactate at 400 degrees C with 7.7 seconds contact time.