화학공학소재연구정보센터
Journal of Power Sources, Vol.175, No.2, 903-908, 2008
Preparation and electrochemical properties of carbon-doped TiO2 nanotubes as an anode material for lithium-ion batteries
Carbon-doped TiO2 nanotubes were synthesized through a sol-gel and subsequent hydrothermal process. Transmission electron microscopy and X-ray diffraction showed that the products are uniformly straight tubes with the diameter around 10 nm in anatase-type. The electrochemical performances of the nanotubes were tested by constant current discharge/charge, cyclic voltammetry, and electrochemical impedance spectroscopy. The initial discharge capacity reaches 291.7 mAh g(-1) with a coulombic efficiency of 91.7% at a current density of 70 mA g(-1). There is a distinct potential plateau near 1.75 and 1.89 V (versus Li+/Li) in the lithium intercalation and extraction processes, respectively, and the lithium insertion capacity is about 204 mAh g(-1) over the plateau of 1.75 V region in the first cycle. From the 2nd to the 30th cycles, the average reversible capacity loss is less than 1.73 mAh g(-1) per cycle. After 30 cycles, the reversible capacity still remains 211 mAh g(-1) with a coulombic efficiency larger than 99.7%, implying a perfect reversibility and cycling stability. (C) 2007 Elsevier B.V. All rights reserved.