We investigated the tensile behavior of glass-fiber-filled polyacetal [i.e., polyoxymethylene (POM)], focusing on the mutual influence of the functional groups in the POM matrices and the glass binder system. The different POM matrices were compounded with three kinds of glass fibers (20 wt %) treated with different glass binders, namely, epoxy resin, thermoplastic polyurethane (TPU), and a mixture of TPU and epoxy resin. A good correlation between the tensile strength and elongation at break was observed, regardless of the difference in the glass binders. The composites based on the modified POM matrix, which had both a carboxyl end group and a hydroxyl end group, improved the tensile properties noticeably in comparison with those based on the normal POM matrix. The composites were strengthened with an increase in the concentration of the functional groups. The results of scanning electron microscopy observations indicated that the fractured surfaces of a specimen having maximum tensile strength and elongation exhibited cohesion of the modified POM on the surfaces of the glass fibers. (C) 2007 Wiley Periodicals, Inc.