화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.20, No.1, 21-27, February, 2009
1-Aza-15-Crown-5-Styrene (위험물)-DVB 수지에 의한 희토류 금속 이온들의 흡착 특성
Adsorption Characteristic of Rare Earth Metal Ions on 1-Aza-15-Crown-5-Styrene (Hazardous Materials)-DVB Resin
E-mail:
초록
1%, 2%, 5% 및 20%의 가교도를 가진 스타이렌(제4류 위험물) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성은 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄(UO2^(2+)) > 망간(Mn^(2+) > 프라세듐(Pr^(3+)) 이온이었고, 금속 이온의 흡착력은 1%, 2%, 5% 및 20%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.
Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (a hazardous material) divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 5% and 20% by a substitution reaction. The characteristic of these resins was confirmed by the content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvents and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ion was showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order of uranium (UO2^(2+)) > manganese (Mn^(2+)) > praseodymium (Pr^(3+)). The adsorption was in the order of 1%, 2%, 5%, and 20% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.
  1. Ha YG, J. Kor. Chem. Soc., 23, 136 (1979)
  2. Chi KW, Ahn YS, Shim KT, Huh H, Ahn JS, Kor. Chem. Soc., 23, 688 (2002)
  3. Frensdorff HK, J. Am. Chem. Soc., 93, 4684 (1971)
  4. Grimslery PG, Lindoy LF, Lip HC, Smith RJ, Baker JT, Aust. J. Chem., 30, 2095 (1977)
  5. Lindoy LF, Adam KR, Bladwine DS, Bashall A, McPartlin M, Powell HR, J. Chem. Soc., Dalton Trans., P, 237 (1994)
  6. Ahearn MA, Kim J, Leong AJ, Lindoy LF, Meehan GV, Mattews OA, J. Chem. Soc., Dalton Trans., P, 3591 (1996)
  7. Huh KS, Sin SG, J. Korean Ind. Eng. Chem., 9(5), 680 (1998)
  8. Jeong HD, Kim DS, Kim KI, J. Korean Ind. Eng. Chem., 16(1), 123 (2005)
  9. Kim JT, Rho GH, J. Kor. Environ. Admist., 13, 133 (2007)
  10. Bombieri G, Depaoli G, J. Chem. Acta., 18, 123 (1976)
  11. Hayashita T, Lee JH, Chem S, Bartsch RA, Anal. Chem., 63, 1844 (1991)
  12. Blasius E, Janzen KP, Pure & Appl. Chem., 54, 2115 (1982)
  13. Egawa H, Nonaka T, Ikari M, J. Appl. Poly. Sci., 29, 2045 (1984)
  14. Park SK, Kim JT, J. Korean Ind. Eng. Chem., 13(8), 765 (2002)
  15. Suh MY, Eom TY, Suh IS, Kim SJ, Bull. Kor. Chem. Soc., 8, 366 (1987)
  16. Marcus Y, Introduction to liquid state chemistry, John Wiley & Sons, London, P. 250 (1977)
  17. Pederson CJ, J. Am. Chem. Soc., 92, 386 (1970)
  18. Howdle SM, Jerabek K, Leocorbo V, Marr PC, Sherrington DC, Polymer, 41, 7272 (2000)