화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Chemical Engineering, Vol.25, No.5, 1160-1164, September, 2008
DOI10.1007/s11814-008-0191-2  Export Citation
Excess molar enthalpies for the binary and ternary mixtures of ether compounds (di-isopropyl ether, di-butyl ether, propyl vinyl ether) with ethanol and isooctane at 298.15K
Moon-Gab Kim, So-Jin Park1, †, and In-Chan Hwang1
  • School of Applied Chemical Engineering, Sangju National University, Sangju 742-711, Korea
  • 1Department of Chemical Engineering, Chungnam National University, Daejeon 305-764, Korea
E-mail:
di-isopropyl ether (1)+isooctane (2), ethanol (1)+isooctane (2), di-butyl ether (1)+ethanol (2), di-butyl ether (1)+isooctane (2), propyl vinyl ether (1)+ethanol (2) and propyl vinyl ether (1)+isooctane (2). These data were obtained by using an isothermal flow calorimeter. The experimental binary HE data were well correlated with the Redlich-Kister model, and infinitely dilute partial excess molar enthalpies for each binary were calculated with the fitted Redlich-Kister parameters. Additionally, the isoclines of HE for ternary systems di-isopropyl ether (1)+ethanol (2)+isooctane (3), di-butyl ether (1)+ethanol (2)+isooctane (3) and propyl vinyl ether (1)+ethanol (2)+isooctane (3) at 298.15 K were calculated by using the Radojkovi equation. HE for all the measured systems in this work shows that mixing is endothermic.
Keywords:Excess Molar Enthalpy (HE);DIPE (di-isopropyl ether);DBE (di-butyl ether);PVE (propyl vinyl ether);Ethanol;Isooctane
  1. Pedrosa GC, Salas JA, Katz M, Thermochim. Acta, 160, 242 (1990)
  2. Park SJ, Lee TJ, Korean J. Chem. Eng., 12(1), 110 (1995)
  3. Park SJ, Han KJ, Gmehling J, Fluid Phase Equilib., 200(2), 399 (2002)
  4. Oh JH, Park SJ, J. Chem. Eng. Data, 43(6), 1009 (1998)
  5. Fischer K, Fischer SJ, Gmehling J, J. Phys.-Chem. Data, 2, 135 (1996)
  6. Han KJ, Park SJ, Gmehling J, J. Chem. Eng. Data, 52, 230 (2007)
  7. Han KJ, Hwang IC, Park SJ, Park IH, J. Chem. Eng. Data, 52, 1018 (2007)
  8. Hwang IC, Han KJ, Park SJ, J. Chem. Eng. Data, 52, 1118 (2007)
  9. Dortmund Data Bank Software Package (DDBSP), version 2006 professional. (http://www.ddbst.de)
  10. Isothermal Microcalorimeter Use’s Manual Revision 3.0, Calorimetry Sciences Corp (1997)
  11. Kim YW, Kim MG, Korean Chem. Eng. Res., 42, 426 (2004)
  12. Peng DY, Benson GC, Lu BCY, J. Chem. Thermodyn., 34(4), 413 (2002)
  13. Wang L, Benson GC, Lu BCY, J. Chem. Thermodyn., 24, 1305 (1992)
  14. Redlich O, Kister AT, Ind. Eng. Chem., 40, 345 (1948)
  15. Radojkovic N, Tasic A, Grozdanic B, Malic M, J. Chem. Thermodyn., 9, 349 (1977)