Separation Science and Technology, Vol.42, No.8, 1719-1730, 2007
Modeling of boehmite leaching from actual hanford high-level waste samples
The Department of Energy plans to vitrify approximately 60,000 metric tons of high level waste sludge from underground storage tanks at the Hanford Nuclear Reservation. To reduce the volume of high level waste requiring treatment, a goal has been set to remove about 90 percent of the aluminum, which comprises nearly 70 percent of the sludge. Aluminum in the form of gibbsite and sodium aluminate can be easily dissolved by washing the waste stream with caustic, but boehmite, which comprises nearly half of the total aluminum, is more resistant to caustic dissolution, and requires higher treatment temperatures and hydroxide concentrations. In this work, the dissolution kinetics of aluminum species during caustic leaching of actual Hanford high level waste samples is examined. The experimental results are used to develop a shrinking platelet model that provides a basis for the prediction of dissolution dynamics from a known process temperature and hydroxide concentration. This model is further developed to include the effects of particle size polydispersity, which is found to strongly influence the rate of dissolution. Two identical parameters for this model are used to describe leaching data from two sets of leaching results. When compared to other common monodisperse shrinking particle models, this result suggests a more physically meaningful model.