The aim of this article was to show the effects of an electron radiation dose and presence of a compatibilizer on the oxidation of composites made of blends of low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), and poly(ethylene terephthalate) (PET) as well as of blends of LDPE, HDPE, and PP. As the compatibilizers, the styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride (SEBS-g-MA) and trimethylol propane trimethylacrylate (TMPTA) were used; they were added in the amounts of 5, 10, and 15 wt% and 1, 2, and 3 wt%, respectively. The oxidation of the surface layer (SL) was investigated by the X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It was found that the extent of the composite oxidation increased with the increasing dose of the electron radiation. The addition of the compatibilizers enhanced the oxidation of the SL but hindered the oxidation of the bulk of the material. (c) 2007 Elsevier B.V. All rights reserved.