Mesoporous Ce0.8Sm0.2O1.9 (SDC) oxide with high surface area was prepared by a novel glycine-nitrate combustion process within situ created nickel oxide as template. and applied as the catalytic layer for methane-fueled solid-oxide fuel cells (SOFCs) operated at reduced temperatures. The weight ratio of nickel oxide to SDC in the synthesis process was found to have significant effect on both the crystallite size and the textural properties of the resulted SDC powder. In particular, when it was at 9, the thermally stable and well-crystallized SDC powder showed a mesoporous structure with narrow pore-size distribution. high surface area (77 m(2) g(-1)) and large pore volume (similar to 0.2276 cm(3) g(-1)), even after the calcination at 700 degrees C for 3 h. The mesoporous SDC was found to favor free gas diffusion with no gas diffusion polarization Occurred even at high current density both for hydrogen and methane fuels. The SOFC with Ru impregnated mesoporous SDC catalytic layer displayed promising performance with a peak power density of similar to 462 mW cm(-2) at 650 degrees C. (c) 2007 Elsevier B.V. All rights reserved.