Poly(glycolide-CO-L-lactide) (PGA/PLLA) is a random copolymer with 92 wt % PGA, being the basic resin for Vicryl((R)) ) suture. Molecular dynamics of PGA/ PLLA in its wholly amorphous state and during isothermal cold crystallization at 70 and 80 degrees C have been analyzed. Experimental results were generated over a wide range of frequency and temperature by broad-band dielectric spectroscopy (DRS). The variation of the average relaxation time (defined as tau = [1/2]pi f(max) where f(max) is the frequency at maximum loss for the main a relaxation) has been studied during cold crystallization and the temperature dependence of this average relaxation time for wholly amorphous and crystallized samples has been analyzed. This behavior has been modeled by Havriliak-Negami, Vogel-Fulcher-Tammann, and Kohlrausch-Williams-Watts equations. The evolution profile of the dynamics (frequency at which the maximum loss appears, f (max)) depends on the crystallization temperature, being different at 80 degrees C relatively to 70 degrees C, which could reflect different progress of the spherulitic morphology, as it is shown by the evolution of the morphologies obtained during the crystallization processes, followed by optical microscopy. While the loss maximum (and consequently relaxation times) remains almost unmodified during the crystallization process at 70 degrees C, for the process at 80 degrees C the maximum first moves slightly to higher frequencies (shortening of relaxation times) and at the final stages of crystallization it moves to lower frequencies (increasing the relaxation times). Supporting evidence about the thermal behavior of the polymers has been obtained with DSC. (c) 2007 Wiley Periodicals, Inc.