Inverse gas chromatography has been widely used to determine the Flory-Huggins parameter, chi, between a plasticizer and a polymer, or between two polymers. Many studies showed that interaction parameters may be probe dependent. In a recent study it was proposed that, when a specific interaction occurred between two polymers, the probes had less interaction with the polymers, leading to a lower solubility parameter for polymer blends than the volume average of the components. An equation was derived to relate the probe dependency to the deviation of solubility parameter of polymer mixtures. Here this approach is applied to plasticized poly(vinyl chloride) (PVC) and a copolymer, and to poly(vinylidene fluoride)-poly(ethyl methacrylate) blends. For a PVC and epoxidized oil system the relative deviation of specific retention volume showed two trends, with saturated hydrocarbons as one group, and polar and aromatic probes as another group. For the poly(vinylidene fluoride)/poly(ethyl methacrylate) system the plot of retention volume deviation versus solubility parameter of probes also showed separate trends for n-alkanes, esters, and alcohols. But the plot of phi(2)phi 3RT(chi(23)/V-2) versus solubility parameter had better linearity for the systems studied. The slope of this plot was used as an indicator for miscibility.