A poly (ethylenimine) (PEI) was employed to obtain a stable positively charged surface on a poly(D,L-lactide) (PDL-LA) tissue engineering scaffold. An extracellular matrix (ECM)-like biomacromolecule, gelatin, was selected as polyelectrolyte and deposit alternately with PEI on the activated PDL-LA scaffold via ESA technique. The xi-potential result showed alternating charge of polyelectrolytes (PEI/gelatin) layering on PDL-LA microspheres. Quartz crystal microbalance (QCM) measurement further verified the gradual deposition of PEl/gelatin on the PDL-LA thin film. The combination of PEI aminolysis and the layer-by-layer technique was then explored to construct gelatin coating onto the 3-D porous PDL-LA scaffold. Scanning electronic microscopy showed that there is no notable difference between modified and unmodified PLA scaffolds, with regard to the porosity, pore diameter, and scaffold integration. The dual-tunnel confocal laser scanning microscopy indicated uniform gelatin distribution on the inner surface of the 3-D porous scaffold. The gradual build-up of protein layer on scaffold was investigated by radioiodination technique. Chondrocyte was chosen to test the cell behaviour on modified and unmodified PDL-LA scaffolds. The results of the cell viability, total intracellular protein content, and cell morphology on the PEI/gelatin multilayers modified PDL-LA scaffold showed to promote chondrocyte growth. Comparing conventional coating methods, polyelectrolyte multilayers are easy and stable to prepare. It may be a promising choice for the surface modification of complex biomedical devices. These very flexible systems allow broad medical applications for drug delivery and tissue engineering.