Poly(epsilon -caprolactone) (PCL) is known to biodegrade under composting or water sewage plant conditions. However, as compared with poly(ol-hydroxy acids) derived from lactic and glycolic acids, PCL is much more resistant to chemical hydrolysis and is achiral, a feature that limits very much the possibility of property modulation through the configurational structure of polymer chains. For the sake of enlarging the family of PCL-type polymers, a novel method is proposed which is based on the anionic activation of PCL chain by the removal of a proton from the methylene group in a-position of the ester carbonyl present in the main chain, using a nonnucleophilic base such as lithium diisopropyl amide (LDA). This activation leads to a polycarbanion onto which various electrophile groups can be attached. The feasibility of the process was first shown on poly(methyl acrylate), (PMA), whose polyacrylic main chain is resistant to strong bases. The PMA polycarbanion was modified by various electrophiles, namely benzaldehyde, naphthoyl chloride, benzyl chloroformate, and iodomethane. In a second stage, the same reactions were performed successfully on PCL. The degree of substitution depended on the experimental conditions. PCL underwent main chain degradation during the formation of the polycarbanion whereas the reaction with the electrophiles did not cause any further main chain cleavages. The degradation of PCL chains can be limited enough to give access to novel functional PCL polymers.