A series of poly(butylene succinate) (PBS) nanocomposites with the organoclay C12PPh-Mica were synthesized by using the in-situ interlayer polycondensation of 1,4-butanediol with succinic acid. The PBS nanocomposites were melt-spun to produce monofilaments with various organoclay contents and draw ratios (DRs). The thermo-mechanical properties and morphologies of the PBS nanocomposites were determined using differential scanning calorimetry, thermogravimetric analysis, wide angle X-ray diffraction, transmission electron microscopy, and a universal tensile machine. Some of the clay particles were found to be well dispersed in the PBS matrix, with some agglomerated at a size level greater than approximately 20 nm. The thermal degradation properties of undrawn PBS hybrid fibers were found to improve with increasing clay content. The ultimate tensile strengths and initial moduli of the hybrid fibers increased with increasing clay content at DR = 1. However, the ultimate strengths were found to decrease markedly with increases in DR from 1 to 6. In contrast to the trend for the tensile strengths, the initial moduli of the hybrid fibers increased only slightly with increases in DR up to 6.