Textile composites have been used extensively as industrial materials because of the excellent mechanical properties resulting from the continuously oriented fiber bundle. In a study of the mechanical properties, it is important to consider the fiber/matrix interface property as for other composite materials. In a recent study, the fiber/matrix interface is regarded as an interphase that has its own material constants and thickness; consequently, the mechanical properties of a composite can be controlled by specifically designing the interphase. In this study, we applied this concept to braided composites with flexible resin as interphase for the purpose of designing the interphase. In a static tensile test, though there were no improvements in Noncut specimens (normal braided composites), but a Cut specimen teach side of the Noncut specimen was cut) with flexible interphase was improved in fracture load and displacement. The observation of the specimen edge was carried out and it was confirmed that the progress of debonding at the fiber bundle intersection was interrupted by a flexible interphase, and a matrix crack did not occur in the Cut specimen with flexible interphase. In a fiber bundle pull-out test, it was confirmed that debonding progressed not into the fiber/resin interface but into the flexible interphase in the specimen with flexible interphase, and the interfacial property at the fiber bundle intersection was improved.