Applied Surface Science, Vol.253, No.5, 2941-2946, 2006
XPS study of the deposited Ti layer in a magnetron-type sputter ion pump
X-ray photoelectron spectroscopy (XPS) was used to study the surface chemical composition of the anode deposits in a miniature magnetron ion pump. The pump was mounted on an UHV system with the ultimate pressure of 1 x 10(-9) mbar. A stable discharge was established in the nitrogen atmosphere with some traces of CO at about 10(-7) mbar. The cathode was made of pure titanium. The sputtered titanium atoms deposited on the anode, where they reacted with gases to form a film of titanium compounds. The thickness of the deposited titanium layer on the anode was about 100 nm. The results from XPS investigations indicate that active gases such as O-2 and N-2 react with Ti forming TiO2 and TiN. While carbon containing molecules just adsorb on the surface and do not form carbide. In the bulk of the deposited layer almost pure TiN was found with some traces of oxygen and carbon. The part of carbon was bonded to TiC, which can be caused by ion sputtering during the depth profiling. (c) 2006 Elsevier B.V. All rights reserved.
Keywords:XPS;thin films;titanium nitride;titanium oxide;titanium carbide;sputter ion pump;discharge cell;magnetron cell;sputtering;deposition