Deagglomeration of ceramic powders is usually accomplished by immersion of powders in a surfactant-containing liquid vehicle, followed by milling. We seek alternative mechanisms to the classical milling approach by generating a chemical pressure to break up the agglomerate. This study explores the enhanced redispersion of TiO2 ceramic compacts that contain a nonionic water-soluble polymer, poly(ethylene glycol) (PEG). PEG forms a polymer solution within the agglomerated structure during redispersion. The resulting osmotic pressure gradient forces water into the porous structure and creates a tensile stress on the particle network with magnitudes as high as 0.6 MPa. Thus, the principle to achieving redispersion is to develop osmotic pressures that exceed the cohesive strength of the agglomerated structure. A critical PEG concentration of 2.0 vol% PEG 400 with respect to titania has been determined, below which redispersion is minimal.