Recently, a method for evaluating the fracture toughness of ceramics has been proposed by Fett based on the computed crack-opening displacements of cracks emanating from Vickers hardness indentations. To verify this method, experiments have been conducted to determine the toughness of a commercial silicon carbide ceramic, Hexoloy SA, by measuring the crack-opening profiles of such Vickers indentation cracks. Although the obtained toughness value of K-o = 2.3 MPa.m(1/2) is within 10% of that measured using conventional fracture toughness testing, the computed crack-opening profiles corresponding to this toughness display poor agreement with those measured experimentally, raising concerns about the suitability of this method for determining the toughness of ceramics. The effects of subsurface cracking and cracking during loading are considered as possible causes of such discrepancies, with the former based on direct observations of lateral subsurface cracks below the indents.