The objective of the present study was to investigate the adsorption of the heavy metals mercury(II) and chromium(All). from aqueous solutions, onto Moroccan stevensite. A mineralogical and physicochemical characterization of natural stevensite was carried out. In order to improve the adsorption capacity of stevensite for Cr(VI), a preparation of stevensite was carried out. It consists in saturating the stevensite by ferrous iron Fe(II) and reducing the total Fe by Na2S2O4. Then, the adsorption experiments were studied in batch reactors at 25 +/-3degreesC. The influence of the pH solution on the Cr(VI) and Hg(II) adsorption was studied in the pH range of 1.5-7.0. The optimum pH for the Cr(VI) adsorption is in the pH range of 2.0-5.0 while that of Hg(II) is at the pH values above 4.0. The adsorption kinetics were tested by a pseudo-second-order model. The adsorption rate of Hg(II) is 54.35 mmol kg(-1) min(-1) and that of Cr(VI) is 7.21 mmol kg(-1) min(-1). The adsorption equilibrium time for Hg(II) and Cr(VI) was reached within 2 and 12 h. respectively. The adsorption isotherms were described by the Dubinin-Radushkevich model. The maximal adsorption capacity for Cr(VI) increases from 13.7 (raw stevensite) to 48.86 mmol kg(-1) (modified stevensite) while that of Hg(II) decreases from 205.8 to 166.9 mmol kg(-1). The mechanism of 1-12(II) and Cr(VI) adsorption was discussed. (C) 2004 Elsevier B.V. All rights reserved.