Clean Technology, Vol.13, No.1, 72-78, March, 2007
경막형 용융결정화에 의한 나프탈렌 혼합물의 분리에 관한 냉각속도와 결정화기 형태의 영향
Effect of Cooling Rate and Crystallizer Type on the Separation of Naphthalene Mixture by Layer Melt Crystallization
E-mail:
초록
석유 잔사유(PGO)에 포함된 유효성분을 분리하기 위한 기초 연구로 컬럼 및 봉형 용융 결정화기를 사용하여 나프탈렌에 불순물로 2-메틸나프탈렌, 인덴, 1-메틸나프탈렌을 각각 포함시킨 혼합물에 관한 분리정제 연구를 수행하였다. 결정화시, 나프탈렌의 순도는 냉각속도가 낮거나, 융점이 상대적으로 낮은 분술물이 포함될수록 증가하는 경향을 나타내었으며, 동일한 조건에서 컬럼형 결정화기의 순도는 봉형에 비해 결정화후 부분용융에서 순도의 증가에 기인하여 높은 경향을 나타내엇다.
As a basic research for the separation of effective components included in pyrolysis gas oil, the crystallization on each system of naphthalene with 2-methylnaphthalene, indene and 1-methylnaphthalene as impurity has been carried out in column and cold-finger type crystallizer, respectively. In crystallization operation, the purity of naphthalene has been a tendency of increase with decreasing of cooling rate and in the presence of impurity with lower melting point. In comparison of crystallizer types, naphthalene purity in column type crystallizer was a higher value than that in cold-finger type due-to effective sweating operation after crystallization.
- Kim KJ, Kim JW, Kim JK, Cheon YH, J. Korean Ind. Eng. Chem., 13(1), 63 (2002)
- Koh JY, Kim CU, Park SJ, Clean Technol., 12(3), 157 (2006)
- Zuber L, Lazecky J, Hydrocarb. Process., 55 (2005)
- Tatsuya, Nobusawa., Toshihide, Suzuki., and Akinori, Mastsuura., "Process for Producing 2-Methylnaphthalene." US patent 5,276,234 (1994)
- Wellinghoff G, Wintermantel K, Int. Chem. Eng., 35(1), 17 (1994)
- Nicholas PW, Chem. Eng. Prog., 52 (1992)
- Kim KJ, Kim JW, Lee JM, Park SJ, HWAHAK KONGHAK, 37(5), 692 (1999)
- Matsuoka M, Fukuda T, Takagi Y, Takiyama H, J. Cryst. Growth, 166, 1035 (1996)
- Kim KJ, Ulrich J, J. Colloid Interface Sci., 252(1), 161 (2002)
- Kim KJ, Ulrich J, J. Cryst. Growth, 234, 551 (2002)
- Chianese A, Cipriani P, Parisi M, Chem. Eng. J., 87(2), 187 (2002)
- Kim SI, Koh JY, Kim CU, Koh JC, Park SJ, Seo YJ, Choi BR, J. Korean Ind. Eng. Chem., 16(4), 581 (2005)