- Previous Article
- Next Article
- Table of Contents
Journal of Applied Polymer Science, Vol.103, No.5, 3447-3452, 2007
Control of structure and mechanical properties for binary blends of poly(3-hydroxybutyrate) and cellulose derivative
Structure and mechanical properties for binary blends composed of a poly(3-hydroxybutyrate) (PHB) and a cellulose derivative, such as cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB), have been studied by means of dynamic mechanical analysis, isothermal crystallization measurements, and tensile testing. It is found that beta relaxation temperature due to glass transition of PHB or PHB-rich phase in the blends, in which the cellulose derivative has lower molecular weight, is almost the same as that of the pure PHB. On the other hand, the peak location is shifted to even lower temperature than that of the pure PHB by blending the cellulose derivative with higher molecular weight, although the cellulose derivative is a glassy polymer with high glass transition temperature. Further, the blend with lower beta relaxation temperature exhibits ductile behavior with low modulus in uniaxial deformation. The difference in the structure and mechanical properties for the blends are found to be determined by the crystallization rate. (c) 2006 Wiley Periodicals, Inc.