Electrodeposition of nanoporous ZnO films and their applications to dye-sensitized solar cells (DSSCs) were investigated in the aim of developing cost-effective alternative synthetic methods and improving the ZnO-based DSSCs performance. ZnO films were grown by cathodic electrodeposition from an aqueous zinc nitrate solution containing polyvinylpyrrolidone (PVP) surfactant. PVP concentration had strong effects on the grain sizes and surface morphologies of ZnO films. Nanoporous ZnO film with grain size of 20-40 nm was obtained in the electrolyte containing 4 g/L PVP. The X-ray diffraction pattern showed that nanoporous ZnO films had a hexagonal wurtzite structure. Optical properties of such films were studied and the results indicated that the films had a band gap of 3.3 eV. DSSCs were fabricated from nanoporous ZnO films and the cell performance could be greatly improved with the increase of ZnO film thickness. The highest solar-to-electric energy conversion efficiency of 5.08% was obtained by using the electrodeposited double-layer ZnO films (8 mu m thick nanoporous ZnO films on a 200 nm thick compact nanocrystalline ZnO film). The performance of such cell surpassed levels attained in previous studies on ZnO film-based DSSCs and was among the highest for DSSCs containing electrodeposited film components. (c) 2006 Elsevier Ltd. All rights reserved.