[1]Benzoselenopheno[3,2-b][1]benzoselenophene (BSBS) and its 2,7-diphenyl derivative (DPh-BSBS) were readily synthesized from diphenylacetylene and bis(biphenyl-4-yl)acetylene, respectively, with a newly developed straightforward selenocyclization protocol. In contrast to the parent BSBS that has poor film-forming properties, the diphenyl derivative DPh-BSBS formed a good thin film on the Si/SiO2 substrate by vapor deposition. X-ray diffraction examination revealed that this film consists of highly ordered molecules that are nearly perpendicular to the substrate, making it suitable for use in the fabrication of organic field-effect transistors (OFETs). When fabricated at different substrate temperatures (room temperature, 60 degrees C, and 100 degrees C) in a "top-contact" configuration, all the DPh-BSBS-based OFET devices exhibited excellent p-channel field-effect properties with hole mobilities >0.1 cm(2) V-1 s(-1) and current on/off ratios of similar to 10(6). This high performance was essentially maintained over 3000 continuous scans between V-g = +20 and -100 V and reproduced even after storage under ambient laboratory conditions for at least one year.