Optimized and robust designs of one-side heated plasma-facing components and other heat flux removal components are dependent on conjugate heat transfer. In the present case, the conjugate heat transfer involved measuring the local distributions of the inside wall temperature and heat flux in a single-side heated monoblock flow channel with: (1) peripheral (radial and circumferential) heat transfer; and, (2) coupled internal turbulent, forced convective single-phase flow and flow boiling. For the first time, multi-dimensional boiling curves have been measured for a single-side heated monoblock flow channel. Using a thermal hydraulic diameter as the characteristic dimension in select correlations for the highest mass velocity (3.2 Mg/m(2) s), good agreement was obtained. At lower mass velocities, only the single-phase correlations agreed better with the data for the averaged net incident heat flux vs the inside channel wall temperature. Hence, additional correlation development and adaptation are needed for single-side heated monoblocks with peripheral heat transfer. (c) 2005 Elsevier Ltd. All rights reserved.