Polyglycidylmethacrylate grafted butadiene rubber (PGN4A-g-BR) was synthesized by a graft Solution copolymerization technique. The PGMA content was determined through titration against HBr. The PGMA-g-BR was blended with styrene butadiene rubber/butadiene acrylonitrile rubber (SBR/NBR) blends with different blend ratios. The SBR/NBR (50/50) blend was selected to examine the compatibility of such blends. Compatibility was examined using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and viscosity measurements. The scanning electron micrographs illustrate the change of morphology of the SBR/NBR rubber blend as a result of the incorporation of PGMA-g-BR onto that blend. The T(g)s of SBR and NBR in the blend get closer upon incorporation of PGMA-g-BR 10 phr, which indicates improvement in blend homogeneity. The intrinsic viscosity (77) versus blend ratio graph shows a straight-line relationship, indicating some degree of compatibility. Thermal stability of the compatibilized and uncompatibilized rubber blend vulcanizates was investigated by determination of the physicomechanical properties before and after accelerated thermal aging. Of all the vulcanizates with different blend ratios under investigation, the SBR/NBR (25/75) compatibilized blend possessed the best thermal stability. However, the SBR/NBR (75/25) compatibilized blend possessed the best swelling performance in brake fluid. The effect of various combinations of inorganic fillers on the physicomechanical properties of that blend, before and after accelerated thermal aging, was studied in the presence and absence of PGMA-g-BR. (c) 2005 Wiley Periodicals, Inc.