The formation of large (similar to 20-35 nm) surface hemimicelles in monolayers of sernifluorinated alkanes, CnF2n+1CmH2m+1 (FnHm), observed after transfer onto silicon wafers, is a general phenomenon. F6H16 and F8H14 exclusively form highly monodisperse circular hemimicelles, organized in a hexagonal array. The other FnHm investigated form both circular and elongated hemimicelles. The longer FnHm is, the larger the area fraction of elongated micelles; both the hydrocarbon block (H-block) and the fluorocarbon block (F-block) affect this area fraction. The length of the elongated micelles increases with the total length of the diblocks. The diameter of the circular micelles increases with the length of the H-block but, unexpectedly, not with that of the F-block. Model calculations account for these observations. Close examination of the circular micelles showed that they generally present a pit or a tip at their center. The width of the elongated micelles is comparable to the radius of the circular micelles, suggesting that the latter arise from a partition of elongated micelles, followed by coalescence of the edges of the resulting fragments. The elongated micelles become shorter and fewer when surface pressure increases, further suggesting a conversion of elongated into circular micelles. This conversion is reversible. The surface pressure-molecular area isotherms do not present any feature that forebears the existence of hemimicelles. The obtaining of stable surface patterns from simple, "nonpolar" molecular fluorocarbon/hydrocarbon diblocks opens a new approach for producing featured nanostructures from organic templates.