Organic-inorganic composite membranes based on poly(vinyl alcohol)/SiO2 were prepared via an aqueous dispersion polymerization route and anion-exchange groups were introduced in the membrane matrix by the chemical grafting of 4-vinylpyridine with the desired content. These membranes were extensively characterized for their surface morphology, thermal stability, water content, and surface-charge properties using SEM, TEM, FTIR, TGA, water uptake, and ion-exchange capacity measurements. Counterion transport numbers across these membranes were estimated from membrane potential data. Membrane conductance measurements were also performed and these data were used for the estimation of values of counterion diffusion coefficients in the membrane phase. Physicochemical and electrochemical properties of these membranes and equivalent pore radius (estimated from electroosmotic flux measurements) were found to be highly dependent on the 4-vinylpyridine (4-VP) content in the membrane phase. It was also observed that for better selectivity and membrane conductivity of anion-exchange membranes complete optimization of the loading of 4-VP in the membrane phase is necessary. Furthermore, among these, membrane with 25% loading with 4-VP exhibited very good selectivity. water content, and ion-exchange capacity along with moderate membrane conductivity, which may be used for their application in electro-driven separation at elevated temperatures or for other electrochemical processes. (c) 2005 Elsevier Inc. All rights reserved.