The separation behaviour of asymmetric nanofiltration alumina membranes is determined experimentally for binary NaCl and CaCl2 electrolyte solutions and a ternary NaCl-CaCl2 mixture as a function of pH and pressure. Experimental data suggests that the supported alumina membranes are chemically stable over the pH range 4-10. The measured separation behaviour is compared to the results of a predictive charge-regulation transport model with no adjustable parameters. The model predictions are in good agreement with the experimental data both for the binary as well as for the ternary solution. For pH<6 the retention of CaCl2 is relatively insensitive to the value of the adsorption constant of Ca2+. Obtaining the membrane adsorption parameters by fitting a model to retention data, as is often done in nanofiltration literature, can therefore be delicate. Instead, the acquisition of parameters by independent measurement techniques is clearly preferential. Supports with small pore sizes enhance the membrane's mechanical strength but they can exhibit retention and reduce the flux, leading to a decrease of the overall membrane retention. Two supports with pore sizes of 0.20 and 0.12 mum are compared. The support with the larger pores increased the trans-membrane flux by approximate to40% and the overall membrane retention by approximate to30%, compared to the support with the smaller pores. (C) 2004 Elsevier B.V. All rights reserved.