The effect of light quality on the performance a fixed-film continuous-flow photobioreactor for removal of hydrogen sulfide from synthetic industrial wastewater and conversion of it to elemental sulfur was investigated. Sixteen 150 mm long and 1.6 mm internal diameter (id) Tygon tubes formed the active part of the reactor. At the same light intensity, reactor performance in terms of optimal sulfide loading rates was compared between an infrared bulb and light emitting diodes (LEDs). The LEDs provided light within the peak absorption wavelength range of green sulfur bacteria (GSB) and were used as a light source for the GSB with the goal of reducing the cost of the required light. Though the reactor sustained higher sulfide loading rates using LEDs than when using an infrared bulb at equal light intensities, the infrared bulb has the potential to be more efficient overall. (C) 2004 Society of Chemical Industry.