Pervaporation technique was used to separate water + isopropanol azeotropic mixtures at 30degreesC using pure sodium alginate, pure poly(vinyl alcohol), and blend membranes of sodium alginate containing 10 and 20 mass % of poly(vinyl alcohol). The membrane performance was studied by calculating flux, selectivity, pervaporation separation index, and enrichment factor. Pure sodium alginate membrane gave the highest pervaporation separation index for all compositions of water. Pervaporation experiments were carried out for 10 mass % containing water + isopropanol mixture at 30, 40, and 50degreesC. The Arrhenius activation parameters were computed. The PV results have been analyzed by considering complete mixing and plug flow models. Design parameters, like membrane area, permeate concentrations, flux, stage cut, separation selectivity, etc., have been calculated for different feed compositions of water in the mixture. Results are explained in terms of sorption-diffusion principles. (C) 2005 Wiley Periodicals, Inc.