The effect of calcium oleate on foam stability was studied for aqueous solutions of two commonly used surfactants (anionic and nonionic) under alkaline conditions in the absence of oil. For the anionic surfactant, defoaming by calcium oleate appears to involve two mechanisms. One is that oleate and calcium ions are presumably incorporated into the surfactant monolayers with a resulting decrease in the maximum of the disjoining pressure curve and therefore produces less stable thin films. The other is bridging of the films by calcium oleate particles. The latter mechanism was especially important in freshly made solutions where precipitation in the aqueous phase was still occurring when the foam was generated. Foams generated after aging (hours) when precipitation was nearly complete were more stable even though solution turbidities were greater. Foams of the nonionic surfactant were less stable than those of the anionic surfactant but were also destabilized by sufficient amounts of calcium oleate and exhibited a similar aging effect. A simplified model was developed for estimating the sodium oleate concentration at which precipitation commences in solutions of the anionic surfactant containing dissolved calcium. It includes enhancernent of calcium content in the electrical double layers of the surfactant micelles. Predictions of the model were in agreement with experiment. (C) 2004 Elsevier Inc. All rights reserved.