The vulcanization of natural rubber (NR) latex can be effectively carried out at low temperatures by using binary accelerator systems containing thiourea (TU) as a secondary accelerator. It was reported that sulfur-containing nucleophiles such as thiourea enable the primary accelerator to become effective even at low temperatures, indicating a nucleophilic reaction mechanism in such vulcanization reactions. In the present study, a derivative of thiourea [viz. aminoiminomethyl thiourea (AMT)], which is more nucleophilic than thiourea, is used as a secondary accelerator in the sulfur vulcanization of NR latex. One of the aims of this study was to give conclusive evidence for a nucleophilic reaction mechanism. The synergistic effect of the above thiourea derivative with primary accelerators such as tetramethylthiuram disulfide (TMTD), zinc diethyldithiocarbamate (ZDC), and cyclohexylbenzthiazyl sulfenamide (CBS) was studied at two different temperatures (viz. 100 and 120degreesC). These binary systems were found to be very effective in reducing the optimum cure time of the different mixes compared to control formulations containing TU. The optimum amount of the secondary accelerator required was also determined. Mechanical properties such as tensile strength and tear strength of the vulcanizates were also evaluated. Chemical characterization of the vulcanizates was carried out by determining the total crosslink density. Values of the cure characteristics evaluated support a nucleophilic reaction mechanism in these vulcanization reactions under review. The effect of this secondary accelerator on the rheological behavior of compounded latex is also studied and was found not to affect adversely. (C) 2004 Wiley Periodicals, Inc.