Lignin powder, obtained from an abundant and low cost source, straw, through a low environmental impact process, the steam explosion, is used for the preparation of blends with low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE) and atactic polystyrene (PS). The obtained blends are processable through the conventional techniques used for thermoplastics; the modulus slightly increases for most lignin-polymer blends, while the tensile stress and elongation reduce. Moreover, lignin acts as a stabilzer against the UV radiation for PS, LDPE and LLDPE. (C) 2004 Published by Elsevier Ltd.