In this work, dynamic analysis and control of a packed distillation column have been utilized theoretically and experimentally. In theoretical studies, two types of mathematical models stagewise (Frank model) and partial differential approaches (back-mixing model), were used. Packed distillation uses 1400 mm packing height, and packing type is rashing ring with 20-15 mm diameter. The reboiler was made from a 13 L glass container. Reflux ratio was adjusted by an on-line computer. The system temperature was measured with six thermocouples. For control studies, the reflux ratio and the reboiler heat dutywere chosen as manipulated variables. Perturbation in feed composition was utilized as the disturbance. Decoupling multivariable dynamic matrix control (DDMC) and Nondecoupling multivariable dynamic matrix control (NDMC) of overhead and bottom compositions were applied for control studies. Performance of the control system was tested by using an integral absolute error (IAE) criterion and it was also compared with decoupling multivariable PID control (DPID) and Nondecoupling multivariable PID control (NDPID).