A useful relationship, ln(T-g) = ln(T-g,T-infinity) - m[eta](-v), between intrinsic viscosity and glass transition temperature for a series of homologous polymers was obtained by combining the Mark-Houwink-Kuhn-Sakurada (MHKS) relation for intrinsic viscosity and molecular mass, and the Fox-Flory equation for glass transition temperature and number-average molecular mass. This relationship was applied to poly(2,6-dimethylphenylmethacrylate) (PDMPh) in a variety of solvents (ideal to good) such as toluene, tetrahydrofuran/water, tetrahydrofuran, and chlorobenzene systems. The parameter alpha estimated by this procedure in toluene, tetrahydrofuran/water, tetrahydrofuran, and chlorobenzene systems are 0.50(6), 0.51(1), 0.56(7), and 0.67(3), respectively which are in agreement with those of Mark-Houwink-Kuhn-Sakurada values by less than 5% differences. The T-g,T-infinity quantity estimated from this equation also is within the standard deviation of that obtained from the Fox-Flory method. The m quantity is increasing as the thermodynamic quality of the solvent improves, therefore, m may be considered as an indicator of coil conformations in a given solvent.