Amphiphilic colloidal particles with hydrophobic cores and hydrophilic shells were prepared via a two-step method. First, polystyrene cores were obtained through the concentrated emulsion polymerization. A mixture of styrene, ethyl benzene, divinyl benzene, azobisisobutyronitrile, and cumene hydroperoxide (CHPO) was partially polymerized at 80 degreesC for 40 min and subsequently used as the dispersed phase of a concentrated emulsion in water. The concentrated emulsion was subjected to complete polymerization at 60 degreesC for 12 h; colloidal particles of crosslinked polystyrene were thus obtained. In the second step, the polystyrene particles were dispersed in water, after which acrylamide, N,N'-methylenebisacrylamide, and ferrous sulfate (FS) were added. The system was heated (typically at 30 degreesC) to conduct the polymerization of the hydrophilic monomers. The CHPO present on the surface of the polystyrene particles and the FS present in the aqueous phase (both together constitute a redox initiator) ensured that the initiation occurred mostly on the surface of the particles and that the hydrophilic polymer obtained formed a shell encapsulating the particles. Under proper conditions, a porous outer shell could be generated, making the hydrophobic core accessible to the outside medium.