A silicon-to-In2O3:Sn coated glass bonding has been developed for the package of field emission arrays fabricated on the silicon wafer, utilizing a conventional silicon-to- silicon anodic bonding using the glass layer. A 1.8 mu m Pyrex #7740 glass layer was deposited on the In2O3:Sn coated glass by an electron beam evaporation. It was confirmed that the composition of the glass layer was nearly the same as that of the bulk Pyrex #7740 glass plate. In this work, bonding the silicon and In2O3:Sn coated glass was achieved at a temperature of 190 degrees C with an applied voltage of 60 V-dc. A secondary ion mass spectroscopy analysis was used to confirm the modeled bonding kinetics of the silicon-to-In2O3:Sn coated glass.