실리콘/EPDM 고무 블렌드의 제조와 특성에 관한 연구

김진국; 이형규; Jin Kuk Kim; Hyung Kyu Lee

Polymer(Korea), Vol.25, No.3, 406-413, May, 2001

Export Citation

실리콘/EPDM 고무 블렌드의 제조와 특성에 관한 연구

Study on Manufacturing and Characteristics of Silicone/EPDM Rubber Blend

김진국^†, 이형규

경상대학교 고분자공학과

Jin Kuk Kim^†, and Hyung Kyu Lee

Department of Polyer Science & Engineering, Advanced Materials Research Institute, Gyeongsang National University, Chinju 660-701, Korea

E-mail:

초록

고분자의 블렌드는 새로운 성질을 가지는 재료의 제조를 위한 하나의 방법으로 제시되고 있다. 그러나 대부분의 재료는 재료사이의 점탄성, 표면에너지 그리고 상호결합력의 차이로 인하여 비상용성을 지니며, 이로 인하여 블렌드물은 예상되는 물성을 나타내지 못하는 경우가 있다. 실리콘 고무는 우수한 내열성과 전기적 성질을 가지며, ethylene propylene diene monomer (EPDM) 고무는 우수한 기계적 물성을 지니고 있다. 본 실험에서는 실리콘과 EPDM 고무의 블렌드를 통한 전기적 성질과 기계적 물성이 우수한 새로운 가능성 재료의 개발에 목적을 두었다.

Blending has become an interesting way for preparing new materials with tailored properties. Unfortunately, many materials are incompatible due to the difference in their viscoelastic properties, surface energy and interaction. Therefore, the properties of polymer blends are not obtained as expected levels. Silicone rubber has an excellent heat-resistance and electrical characteristics, and ethylene propylene diene monomer (EPDM) rubber also has good mechanical properties. The purpose of this study is to develop a new engineering material which has excellent electrical and mechanical properties through blending of silicone with EPDM rubber.

Keywords:Silicons Rubber;EPDM Rubber;Blend

[References]

Roland CM, Macromolecules, 20, 2557 (1987)
Roland CM, "New Developments and Technology", in "Handbook of Elastomers", eds. by A.K. Bhowmick and H.L. Stephens, p. 683, Marcel Dekker, New York (1980)
Karus S, "Polymer Blends", eds. by D.R. Paul and S. Newman, vol. 1, ch. 2, p. 15, Academic Press, New York (1978)
Roychoudhury N, Bhowmick AK, J. Appl. Polym. Sci., 37, 1091 (1991)
Bhowmick AK, Chiba T, Inoue T, J. Appl. Polym. Sci., 50, 2055 (1993)
Setua DK, Pandey KN, Saxena AK, Mathur GN, J. Appl. Polym. Sci., 74(3), 480 (1999)
Kole S, Bhattacharya A, Tripathy DK, Bhowmick AK, J. Appl. Polym. Sci., 48, 529 (1993)
Waddall WH, Evans LR, Gillick JG, Shuttleworth D, Rubber Chem. Technol., 65, 687 (1992)
Oliveira MG, Soares BG, Santos CMF, Diniz MF, Dutra RCL, Macromol. Rapid Commun., 20, 526 (1999)
Santra RN, Samantaray BK, Bhowmick AK, Nando GB, J. Appl. Polym. Sci., 49, 1145 (1993)
Polmanteer KE, "New Developments and Technology, in "Handbook of Elastomers", eds. by A.K. Bhowmick and H.L. Stephens, p. 551, Marcel Dekker, New York (1988)
Flory PJ, "Principles of Polymer Chemistry", p. 576, Cornell University Press, Ithaca, New York (1953)
Bandrup J, Immergut EH, "Polymer Bandbook", 3rd Ed., p. 180, John Wiley & Sons Inc. (1989)

[Referenced By]

[1] Roland CM, Macromolecules, 20, 2557 (1987)

[2] Roland CM, "New Developments and Technology", in "Handbook of Elastomers", eds. by A.K. Bhowmick and H.L. Stephens, p. 683, Marcel Dekker, New York (1980)

[3] Karus S, "Polymer Blends", eds. by D.R. Paul and S. Newman, vol. 1, ch. 2, p. 15, Academic Press, New York (1978)

[4] Roychoudhury N, Bhowmick AK, J. Appl. Polym. Sci., 37, 1091 (1991)

[5] Bhowmick AK, Chiba T, Inoue T, J. Appl. Polym. Sci., 50, 2055 (1993)

[6] Setua DK, Pandey KN, Saxena AK, Mathur GN, J. Appl. Polym. Sci., 74(3), 480 (1999)

[7] Kole S, Bhattacharya A, Tripathy DK, Bhowmick AK, J. Appl. Polym. Sci., 48, 529 (1993)

[8] Waddall WH, Evans LR, Gillick JG, Shuttleworth D, Rubber Chem. Technol., 65, 687 (1992)

[9] Oliveira MG, Soares BG, Santos CMF, Diniz MF, Dutra RCL, Macromol. Rapid Commun., 20, 526 (1999)

[10] Santra RN, Samantaray BK, Bhowmick AK, Nando GB, J. Appl. Polym. Sci., 49, 1145 (1993)

[11] Polmanteer KE, "New Developments and Technology, in "Handbook of Elastomers", eds. by A.K. Bhowmick and H.L. Stephens, p. 551, Marcel Dekker, New York (1988)

[12] Flory PJ, "Principles of Polymer Chemistry", p. 576, Cornell University Press, Ithaca, New York (1953)

[13] Bandrup J, Immergut EH, "Polymer Bandbook", 3rd Ed., p. 180, John Wiley & Sons Inc. (1989)