수성 아크릴 가모용 점착제 물성연구

김정원; Jung-Won Kim

Polymer(Korea), Vol.46, No.1, 1-5, January, 2022

DOI10.7317/pk.2022.46.1.1 Export Citation

수성 아크릴 가모용 점착제 물성연구

Physical Properties of Water-Based Acryl Wig Pressure Sensitive Adhesive

김정원^†

창신대학교 미용예술학과

Jung-Won Kim^†

Dept. of Costmetology, Changshin Univ., 262, Paryong-ro, MasanHoiwon-gu, Changwon-si, Gyeongsangnam-do, Korea

E-mail:

초록

본 연구에서는 수성형 아크릴 가모용 점착제를 제조하였으며, 유화제 조합 및 점착부여제의 함량에 따른 고형분, 초기점착력, 점착력, 고온·고습 유지력, 경시변화율의 물성을 확인하였다. 수성형 아크릴 점착제의 고형분은 57-58%이며, 유성 가모용 점착제에 비해 동등이상의 물성을 갖는 것을 확 인하였다. 특히, 음이온 유화제와 EO몰수가 큰 비이온 반응성 유화제 조합에서 점착부여제의 함량이 감소할수록 점착력과 경시변화율이 감소하는 것을 확인하였다.

In this study, a water-based acrylic wig adhesive was prepared and the physical properties of solid content, initial adhesion, peel strength, holding force, and time-dependent adhesion change were confirmed according to the content of the emulsifier combination and the tackifier. The solid content of the acrylic adhesive was 57-58%, and it had equal or higher physical properties than that of the solvent-based wig adhesive. Particularly, in a combination of an anionic emulsifier and a nonion reactive emulsifier having a large number of moles of EO, the peel strength and the adhesion change were decreased as the content of the tackifier decreased.

Keywords:water-based acrylic adhesive;wig adhesive;nonionic reactive emulsifier;tackifier;adhesion;adhesion change

[References]

Wang X, Sudol ED, El-Aasser MS, J. Polym. Sci., 39, 3093 (2001)
Lakrout H, Sergot P, Creton C, J. Adhes., 69, 307 (2006)
Czech Z, Wesolowska M, Eur. Polym. J., 43, 3604 (2007)
Tobing S, Klein A, Sperling LH, Petrasko B, J. Appl. Polym. Sci., 81(9), 2109 (2001)
Czech Z, Wesolowska M, Eur. Polym. J., 43, 3604 (2007)
Seo IS, Lee MC, J. Korean Ind. Eng. Chem., 18(5), 444 (2007)
Lopez A, Degrandi-Contraires E, Canetta E, Creton C, Keddie JL, Asua JM, Langmuir, 27(7), 3878 (2011)
Lee SC, Jeong NH, Appl. Chem. Eng., 30(3), 352 (2019)
Min HJ, Kim JH, J. Korean Beauty Soc., 22, 412 (2016)
Mallegol J, Gorce JP, Dupont O, Jeynes C, McDonald PJ, Keddie JL, Langmuir, 18(11), 4478 (2002)
Joo HS, Park YJ, Do HS, Kim HJ, Song SY, Choi KY, J. Adhes. Sci. Technol., 21, 575 (2012)
Falsafi A, Tirrell M, Pocius AV, Langmuir, 16(4), 1816 (2000)
Li LH, Tirrell M, Korba GA, Pocius AV, J. Adhes., 76(4), 307 (2001)
Song SH, Kim YS, Cho UR, Elastomers Compos., 44, 429 (2009)
Kraus G, Rollmann KW, J. Appl. Polym., 21, 3311 (1977)
Christensen SF, Everland H, Hassager O, Almdal K, Int. J. Adhes. Adhes., 18, 131 (1998)
Minghetti Cilurzo F, Tosi L, Casiraghi A, Montanari L, AAPS PharmSciTech., 4, 53 (2003)
Toyama M, Ito T, Nukatsuka H, Ikeda M, J. Appl. Polym., 17, 3495 (1973)

[1] Wang X, Sudol ED, El-Aasser MS, J. Polym. Sci., 39, 3093 (2001)

[2] Lakrout H, Sergot P, Creton C, J. Adhes., 69, 307 (2006)

[3] Czech Z, Wesolowska M, Eur. Polym. J., 43, 3604 (2007)

[4] Tobing S, Klein A, Sperling LH, Petrasko B, J. Appl. Polym. Sci., 81(9), 2109 (2001)

[5] Czech Z, Wesolowska M, Eur. Polym. J., 43, 3604 (2007)

[6] Seo IS, Lee MC, J. Korean Ind. Eng. Chem., 18(5), 444 (2007)

[7] Lopez A, Degrandi-Contraires E, Canetta E, Creton C, Keddie JL, Asua JM, Langmuir, 27(7), 3878 (2011)

[8] Lee SC, Jeong NH, Appl. Chem. Eng., 30(3), 352 (2019)

[9] Min HJ, Kim JH, J. Korean Beauty Soc., 22, 412 (2016)

[10] Mallegol J, Gorce JP, Dupont O, Jeynes C, McDonald PJ, Keddie JL, Langmuir, 18(11), 4478 (2002)

[11] Joo HS, Park YJ, Do HS, Kim HJ, Song SY, Choi KY, J. Adhes. Sci. Technol., 21, 575 (2012)

[12] Falsafi A, Tirrell M, Pocius AV, Langmuir, 16(4), 1816 (2000)

[13] Li LH, Tirrell M, Korba GA, Pocius AV, J. Adhes., 76(4), 307 (2001)

[14] Song SH, Kim YS, Cho UR, Elastomers Compos., 44, 429 (2009)

[15] Kraus G, Rollmann KW, J. Appl. Polym., 21, 3311 (1977)

[16] Christensen SF, Everland H, Hassager O, Almdal K, Int. J. Adhes. Adhes., 18, 131 (1998)

[17] Minghetti Cilurzo F, Tosi L, Casiraghi A, Montanari L, AAPS PharmSciTech., 4, 53 (2003)

[18] Toyama M, Ito T, Nukatsuka H, Ikeda M, J. Appl. Polym., 17, 3495 (1973)