Macroscopic models for the uniaxial consolidation of strong colloidal gels typically characterise the compressive strength of the particulate network in terms of the compressive yield stress P-y(phi) or uniaxial elastic modulus K ' (phi). Almost all industrial applications involve multi-dimensional (MD) configurations with arbitrary tensorial stress states, and it is unclear how to generalise these 1D constitutive models to MD consolidation. Several studies have attempted to extend these 1D constitutive models to MD by assuming either isotropic consolidation or zero Poisson's ratio, but the validity of these assumptions is currently unknown. Lacking is a validated tensorial rheology for the consolidation of strong colloidal gels that is capable of predicting the consolidation of these materials. One step toward the development of such tensorial rheology is the consideration of normal stress differences (NSDs) during uniaxial consolidation. Thus, a tensorial constitutive model for the consolidation of colloidal gels cannot be developed without accounting for these NSDs. We address this problem by performing discrete element model (DEM) simulations of the uniaxial consolidation of a two-dimensional (2D) strong colloidal gel and investigate evolution of the tensorial stress state during consolidation. We show that during consolidation, the Poisson ratio increases from zero near the gel point to almost unity near close-packing and uncover the particle-scale mechanisms that underpin these observations. These results provide the first steps toward a complete tensorial rheology of colloidal gels that is capable of resolving the evolution of these complex materials under superposed differential compression and shear. Graphical abstract