The high charge carrier recombination rate and weak oxygen evolution kinetics have impeded the ef-ficiency of WO3 photoelectrodes for water splitting. We present a novel type II heterojunction semiconductor based on mixed WS2 and MoS2 nanosheets on WO3 nanoflakes hydrothermally grown on highly porous W skeletons. The chemically exfoliated transition metal dichalcogenide (TMD) sheets with submicrometric lateral sizes were deposited on the surface of WO3 nanoflakes by the electrophoretic technique to fabricate a staggered gap heterojunction. The photoanode exhibited an impressive current density of 14.9 mA cm(-2) at 1.23 VRHE which comprised-1.7 mA cm(-2) photocurrent under 100 mW cm(-2) simulated sunlight. Co-deposition of MoS2 and WS2 sheets on WO3 nanoflakes improved the current density of porous W\WO3 electrodes by about 340%, while only about 36% improvement is achieved by deposition of single TMD (WO3\MoS2 or WO3\WS2) demonstrating the synergetic effects of TMDs. The high stability of the photoanode in highly acidic media is shown. The synergetic effects of TMDs on active sites, charge transfer resistance, and charge transport properties are elaborated by electrochemical impedance spectroscopy and Mott-Schottky analyses. The composite electrode has a great potential to be used for diverse electrochemical applications including water splitting. (c) 2020 Elsevier Ltd. All rights reserved.