Renewable Energy, Vol.168, 204-215, 2021
Predictive capability evaluation and optimization of sustainable biodiesel production from oleaginous biomass grown on pulp and paper industrial wastewater
Biodiesel, as a green fuel, acts as a potential candidate to supplement conventional fossil fuels. This research study targets green environment (using biodiesel) and clean environment (reduce wastewater) by producing biodiesel through oleaginous biomasses (Yarrowia lipolytica, Metschnikowia pulcherrima and Lipomyces starkeyi) grown on pulp and paper industrial wastewater. Batch culture studies were explored for the potential feedstock of the oleaginous organism by the synthesis of single cell oil and fatty acid methyl ester (FAME) yield. Response surface methodology (RSM) was used to design the optimal experimental matrix and identify the optimal process conditions that enhance the FAME yield. To determine the inherent characteristics of the growth of oleaginous biomasses on the industrial wastewater, a data-driven adaptive neuro-fuzzy inference system (ANFIS) is implemented. Y. lipolytica strain cultured shown high biomass concentration of 32.36 g/l with biomass productivity of 5.39 g/l/d was considered for further scale-up for the transesterification process. Results indicated that the maximum yield of 0.48 (g-biodiesel/g-lipid) was obtained under the 2.5 g of lipid dosage with 0.02 g/ml of catalyst concentration by constant stirring at 70 degrees C. The optimum conditions to achieve maximum FAME yield of 1.154 g/g was obtained at 2.485 g, 70.87 degrees C and 0.021 g/ml for lipid dosage, temperature and catalyst concentrations, respectively. (c) 2020 Elsevier Ltd. All rights reserved.
Keywords:Oleaginous biomass;Fatty acid methyl ester;Biodiesel;Adaptive neuro-fuzzy inference system;Box-Behnken design;Response surface methodology