Biomass-derived graphitic carbon is becoming an attractive material for anodes in lithium-ion and sodium-ion batteries (LIBs and SIBs) owing to its sustainability. The graphitization of biochar by heating above 2600 degrees C not only requires high energy consumption but also removes heteroatoms that are conducive to electrochemical energy storage. In this study, graphitic carbon nanosheets with N/P-dual doping are facilely synthesized by one-step carbonization of pine sawdust at 800/ 1000/1200 degrees C that is priorly dissolved in 1-butyl-3-methyl-imidazolium ([Bmim]H2PO4) and used as anodes of LIBs/SIBs, respectively. [Bmim]H2PO4 simultaneously promotes the graphitization and porosities of the biochar as carbonization temperature increases in addition to providing N/Pdual doping. Used as anodes of LIBs, IWC-1200 demonstrates excellent rate performance and cyclic stability, delivering 385 mAh g(-1) at 1 Ag-1 throughout 1000 cycles. For sodium storage, IWC-1000 exhibits stable capacities of 217 mAh g(-1) at 0.1 A g(-1) and 101 mAh g(-1) at 1 Ag-1. The electrochemical performances benefit from the graphitized structure with N/P-dual doping, leading to redox pseudocapacitance for lithium/sodium storage. DFT calculations suggest that pyridinic N strongly attracts both Li and Na while P atoms inside the graphitic structure significantly increase the interlayer spacing. [GRAPHICS] .