One of the routes to minimize the environmental impact of plastics waste is the use of bio-sourced and biodegradable alternatives, particularly for packaging applications. Although Polyhydroxyalkanoates (PHA) are attractive candidates for food packaging, they have poor processability, particularly for extrusion film blowing. Thus, one relatively successful alternative has been blending PHA with a biodegradable polymer. This work proposes film blowing of a co-extruded Poly (hydroxybutyrate) (PHB) layer with a poly butylene adipateco-terephtalate (PBAT) layer to enhance bubble stability, mechanical and barrier properties. Co-extrusion is detailed, together with the different strategies followed to improve adhesion between film layers and the PHB content in the films. Films with thicknesses below 50 micron and elongation at break beyond 500% were consistently produced.