The application of heat storage systems in households or the industry is one possibility to optimize the degree of heat utilization and to reduce greenhouse gas emissions. In contrast to established heat storage systems based on water, zeolitic systems reach energy densities of 150-200 kWh m(-3) and allow for seasonal storage with almost no heat loss. However, a commercial breakthrough was not yet successful. Given this background, it is the aim of the present study to identify appropriate operational parameters for a zeolite heat storage system in the laboratory and to prepare an upscaling to demonstration scale. To this end, the pressure drop of the zeolite bed, the cycle time, and the optimal process parameters during thermal loading and deloading were determined.