The formation of biofilms capable of efficiently carrying out ureolysis is of fundamental importance in several biotechnological systems such as urinary tract infections, building materials and municipal wastewater treatment. This work proposes a straightforward method for the formation of a ureolytic biofilm attached to graphite. The proposed strategy reduced the time needed to complete ureolysis to 3 days instead of 16 days required in suspension culture. To confirm the formation of a ureolytic biofilm, scanning electron microscopy and confocal laser scanning microscopy studies were employed ex situ. However, it is imperative to analyse the biofilm by direct non-invasive techniques. Accordingly, open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) were used as in situ monitoring techniques. The reduction in OCP from - 0.01 to - 0.2 V vs. Ag/AgCl and the increase in capacitance from 200 to 260 mu F cm(-2)were related to biofilm attachment. To the best of our knowledge, this is the first time in which a ureolytic biofilm attachment has been analysed by EIS. The increase in the biomass from 0.04 to 2.81 mu m(3) mu m(-2)and in average thickness from 10.19 to 32.78 mu m was related to biofilm maturation.