Korean Journal of Chemical Engineering, Vol.37, No.3, 411-422, March, 2020
Experimental study and artificial intelligence modeling of liquid-liquid mass transfer in multiple-ring microchannels
E-mail:
This paper reports the results of using multiple-ring microchannels for enhancing liquid-liquid extraction performance. The effects of geometrical parameters including ring and distance characteristics on the extraction efficiency were studied. The mass transfer performance was analyzed using Water+Alizarin Red S+1-octanol system. By change in geometrical parameters, the extraction efficiency of multiple-ring microchannels improved up to 62.9% compared with that of the plain one. The performance ratio is defined based on two contrary effects of friction factor and extraction efficiency for evaluating the extraction performance. A performance ratio of 1.5 was achieved that confirmed the advantage of using this type of microfluidic extraction system. Artificial neural network and adaptive neurofuzzy inference system were utilized to evaluate the performance ratio of the multiple-ring microchannels. The mean relative error values of the testing data were 0.397% and 0.888% for the neural network and the neuro-fuzzy system, respectively. The estimation accuracy for both models is appropriate, but the precision of the neural network id higher than that of the neuro-fuzzy system. The genetic algorithm approach was employed to develop a new empirical correlation for predicting the performance ratio with a mean relative error of 1.558%.
- Afzal A, Kim KY, Chem. Eng. Sci., 116, 263 (2014)
- Huh YS, Jeon SJ, Lee EZ, Park HS, Hong WH, Korean J. Chem. Eng., 28(3), 633 (2011)
- Mohadesi M, Aghel B, Khademi MH, Sahraei S, Korean J. Chem. Eng., 34(4), 1013 (2017)
- Sato M, Goto M, Sep. Sci. Technol., 39(13), 3163 (2004)
- Yamasaki Y, Goto M, Kariyasaki A, Morooka S, Yamaguchi Y, Miyazaki M, Maeda H, Korean J. Chem. Eng., 26, 1759 (2010)
- Singh KK, Renjith AU, Shenoy KT, Chem. Eng. Process., 98, 95 (2015)
- Tusek AJ, Anic I, Kurtanjek Z, Zelic B, Korean J. Chem. Eng., 32(6), 1037 (2015)
- Tang J, Zhang X, Cai W, Wang F, Exp. Therm. Fluid Sci., 49, 185 (2013)
- Kakavandi FH, Rahimi M, Jafari O, Azimi N, Chem. Eng. Process., 107, 58 (2016)
- Zhang L, Xie F, Li S, Yin S, Peng J, Ju S, Green. Process. Synth., 4, 3 (2015)
- Kaewchada A, Tubslingkra S, Jaree A, Chem. Eng. Res. Des., 117, 784 (2017)
- Das D, Duraiswamy S, Yi Z, Chan V, Yang C, Sep. Sci. Technol., 50(7), 1023 (2015)
- Hossain S, Ansari MA, Kim KY, Chem. Eng. J., 150(2-3), 492 (2009)
- Shah I, Kim SW, Kim K, Doh YH, Choi KH, Chem. Eng. J., 358, 691 (2019)
- Babaei AA, Khataee A, Ahmadpour E, Sheydaei M, Kakavandi B, Alaee Z, Korean J. Chem. Eng., 33(4), 1352 (2016)
- Molashahi M, Hashemipour H, Korean J. Chem. Eng., 29(5), 601 (2012)
- Krishna MSV, Begum KMMS, Anantharaman N, Powder Technol., 307, 37 (2017)
- Lashkaripour A, Goharimanesh M, Mehrizi AA, Densmore D, Microelectron. J., 78, 73 (2018)
- Kakavandi FH, Rahimi M, Baniamer M, Mahdavi HR, Chem. Pap., 71, 2521 (2017)
- Zhao YC, Chen GW, Yuan Q, AIChE J., 53(12), 3042 (2007)
- Tsaoulidis D, Dore V, Angeli P, Plechkova NV, Seddon KR, Chem. Eng. J., 227, 151 (2013)
- Rahimi M, Shabanian SR, Alsairafi AA, Chem. Eng. Process., 48(3), 762 (2009)
- Moosavi SR, Wood DA, Ahmadi MA, Choubineh A, Nat. Resour. Res., 28, 1619 (2019)
- Ahmadi MA, Ebadi M, Yazdanpanah A, J. Pet. Sci. Eng., 123, 7 (2014)
- Ahmadi MA, Masumi M, Kharrat R, Mohammadi AH, Chem. Eng. Technol., 37(3), 409 (2014)
- Ahmadi MA, Math. Probl. Eng., 2015, 1 (2015)
- Ahmadi MA, Shadizadeh SR, Fuel, 102, 716 (2012)
- Ahmadi MA, Fluid Phase Equilib., 314, 46 (2012)
- Ahmadi MA, J. Pet. Explor. Prod. Technol., 1, 99 (2011)
- Ahmadi MA, Ahmadi A, Int. J. Low Carbon Technol., 11, 325 (2016)
- Ahmadi MA, Ahmadi MR, Hosseini SM, Ebadi M, J. Pet. Sci. Eng., 123, 183 (2014)
- Ahmadi MA, Bahadori A, Shadizadeh SR, Fuel, 139, 154 (2015)
- Ahmadi MA, Ebadi M, Marghmaleki PS, Fouladi MM, Fuel, 124, 241 (2014)
- Ahmadi MA, Ebadi M, Fuel, 117, 1074 (2014)
- Yuen CC, Aatmeeyata, Gupta SK, Ray AK, J. Membr. Sci., 176(2), 177 (2000)
- He Y, Pei J, Srinivasakannan C, Li S, Peng J, Guo S, Zhang L, Yin S, Hydrometallurgy, 179, 175 (2018)
- Acharya S, Mishra S, Sep. Sci. Technol., 52(10), 1660 (2017)
- Dil EA, Ghaedi M, Asfaram A, Ultrason. Sonochem., 34, 27 (2017)
- Mehrkesh AH, Hajimirzaee S, Hatamipour MS, Tavakoli T, Chem. Eng. Technol., 34(3), 459 (2011)
- Ghoreishi SM, Hedayati A, Mousavi SO, J. Supercrit. Fluids, 112, 57 (2016)
- Hedayati A, Ghoreishi S, Chem. Prod. Process. Model., 11, 217 (2016)